 |
Bridgeport Introduces EMT Slotted Insulating Bushings
Where non-metallic sheath cable is installed in EMT, the bushing separates the cables to reduce heat buildup and eliminates damage to insulation. Unique punch-out slot design also prevents debris from entering raceway. Use only as many slots as you need, unused slots remain closed.
May be used for single or multiple nonmetallic-sheath cables and telephone, computer, video, or other CAT wiring systems. Punch-out slots are marked with maximum cable size.
Install by placing bushing over end of EMT and tapping onto tubing. Push cables through slots.
For compliance with NEC article 336-6(b) and exception to 1999 NEC article 373.5(c)
Material: Polypropylene rated 105° C
EMT Slotted Insulating Bushings
| Cat. No. |
Item No. |
Trade Size |
Slot Sizes |
Unit Qty |
Std Pkg |
| SIB-050 |
40010 |
1/2" |
2-12/2 |
100 |
1000 |
| SIB-075 |
40011 |
3/4" |
1-10/2, 1-10/3 |
50 |
500 |
| SIB-100 |
40012 |
1" |
3-10/2, 1-10/3 |
25 |
250 |
| SIB-125 |
40013 |
1-1/4" |
3-10/2, 3-10/3 |
25 |
250 |
| SIB-150 |
40014 |
1-1/2" |
2-10/2, 4-10/3 |
--- |
100 |
| SIB-200 |
40015 |
2" |
1-10/2, 4-10/3, 2-8/3 |
--- |
50 |
For more information, contact Sales at Bridgeport Fittings, Inc. Phone: 203.377.5944, Fax: 203.381.3488, or Contact us
|
|
