BridgePort
Featured New
Split Bushing, Insulated, Grounding, Zinc Die Cast
Split Bushing, Insulated, Grounding, Zinc Die Cast
Used in situations where wires have already been pulled through conduit or EMT fittings, and an insulated Grounding bushing is required. Grounding lug; aluminum alloy 60610-T6. Rated 150 Degree C. cULus listed to UL514B and UL467 specifications. Patented. All Zinc Die Cast Mighty-Rites are now available with Stainless steel hardware and UV stabilized insulators, for use in outdoor applications.
Featured New
Locknut, Grounding, Zinc Die Cast
Locknut, Grounding, Zinc Die Cast
Used in place where a grounding bushing and locknut, for bonding connectors inside the box. Perfect for tight locations or fittings with shorter locknut threads. ETL Listed for use with all Bridgeport Fittings connectors. Grounding Locknuts are ETL Listed
Featured New
Set Screw Inside Corner Elbow with removable cover
Set Screw Inside Corner Elbow with removable cover
Bridgeport's Patent-Pending ICE Series Inside Corner Elbow is used to connect two lengths of EMT to form a 90° change of direction. The Inside corner cover allows for installation in locations where the side or back of the elbow is inaccessible.
Featured New
Combination Type LL Conduit Body
Combination Type LL Conduit Body
Type LL Combination EMT/Rigid Conduit Body with Cover and Gasket
View Available Sizes
Featured New
Mighty-Bite™ Push-EMT® Grounding Bushings
Mighty-Bite™ Push-EMT® Grounding Bushings
Bridgeport's Mighty-Bite® Push-EMT® Push on Grounding bushing is used to terminate service EMT conduit. The integrated zinc die cast lug with dual ports is provided for bonding to neutral busbar. Captive nylon 105°C insulator prevents damage to wire insulation. Easy installation, simply push onto conduit!
Featured New
Connector, Liquid Tight, Direct Burial Rated, Zinc Die Cast, Polyolefin Coated
Connector, Liquid Tight, Direct Burial Rated, Zinc Die Cast, Polyolefin Coated
Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. Suitable for use in Direct Burial applications including concrete encasement, as well as corrosive environments. Nicks or cuts in polyolefin coating can be repaired by heating surface until coating flows. Environmentally safe. UV resistant. Salt spray resistance is greater than 2000 hrs. Liquidtight connectors are suitable for use in Class I, Div 2; Class II, Div 1 and 2; and Class III, Div 1 and 2 hazardous locations.
Featured New
Mighty-Bond® Intersystem Ground Rod Bridge Clamp
Mighty-Bond® Intersystem Ground Rod Bridge Clamp
Used as an Intersystem bonding means by utilizing 4-terminal points for connecting communication systems to the same electrical grounding electrode, rod or rebar. Patented
Featured New
Deep Drawn Box 4-Square
Deep Drawn Box 4-Square
Red fire alarm box to meet visual identification requirements for fire alarm installations.
Featured New
Mighty-Hold Universal Clamp Strap, 1 hole, Steel
Mighty-Hold Universal Clamp Strap, 1 hole, Steel
The one piece clamp back and strap secures both cable and conduit. The UCS series secures EMT, Rigid, IMC, Metallic Liquid Tight, Nonmetallic Liquid Tight, FMC, and Schedule 40 and Schedule 80 PVC conduit, as well AC/MC Cable.
Featured New
Threaded Grounding and Bonding Hub, Zinc Die Cast, Aluminum Lay-in Lug
Threaded Grounding and Bonding Hub, Zinc Die Cast, Aluminum Lay-in Lug
Grounding Hubs connect Rigid/IMC conduit to an enclosure, offering Supply-Side Equipment Bonding and grounding options. The combination of an insulated threaded hub and grounding locknut provides a reliable ground fault path for service entrance equipment
Featured New
E-Z Lock Quick Install Connector
E-Z Lock Quick Install Connector
Bridgeport's EZ Lock AMC-50QI is used to connect 14/2 - 10/3 (.43" - .61") AC/MC/MCI-A/HCF cable and 3/8" FMC to box or enclosure. No Tools Required Just squeeze to insert into the 1/2" K.O Use with an anti-short bushing. .375" Throat Opening. Great for lighting whips! Patent Pending
Featured New
Mighty-Merge® Multi-port Transition Fittings. EMT to AC/MC Coupling
Mighty-Merge® Multi-port Transition Fittings. EMT to AC/MC Coupling
Set Screw EMT to cable type transition fittings ideal for commercial and institutional facilities. The Mighty-Merge® transitions are used to securely join EMT to multiple AC/MC/MCI-A/HCF/HCFMCI-A cables or FMC. Patented
Featured New
Mighty-Seal® Raintight Reducing Washers
Mighty-Seal® Raintight Reducing Washers
For maintaining wet locations seal on rated enclosures. Coated Washer installs on outside of 3R rated enclosure. Uncoated washer should be installed inside to maintain raceway continuity. Center reducing washers in middle of knock-out. Listed for use
Featured New
Raintight Compression Connector with Extra Long Threads
Raintight Compression Connector with Extra Long Threads
Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. Features Extra Long (1") Threads, perfect for use with Solar Combiner boxes that have increased wall thicknesses
What's New
We’re always listening to in-the-field problems to create new, efficient solutions that will make your job easier. Check out the latest innovation from Bridgeport Fittings.