Bridgeport Fittings Mighty-Bite™ Couplings are dry location PUSH-EMT® fittings.The 260-MB is used to couple two properly deburred lengths of 1/2" EMT raceway. Simply push the fitting on to the raceway with a slight twist. Remove the fitting by unthreading it from the conduit end. No tools are required. Dry Locations Only. Concre
Mighty-Seal® Push-EMT® Raintight ConnectorsThe 250-MSRT installation is accomplished by inserting a properly deburred end of EMT into the end of the Mighty-Seal and slightly rotating the UL listed fitting until the conduit reaches the end stop. Removal is accomplished by loosening the nut and removing the component parts from the end of the conduit. Reassemble the fitting in the reverse order of the removal process and re-use. Patented
Bridgeport's Mighty-Merge® SPMB Transition CouplingsFor use transitioning between EMT and AC/MC/MCIA or 3/8 FMC; These zinc die cast couplings are ideal for transitioning fixture whips above a drop ceiling for continuing a run of MC down the wall to emergency lights.
Mighty-Bite™ Push-EMT® Grounding BushingsBridgeport's Mighty-Bite® Push-EMT® Push on Grounding bushing is used to terminate service EMT conduit. The integrated zinc die cast lug with dual ports is provided for bonding to neutral busbar. Captive nylon 105°C insulator prevents damage to wire insulation. Easy installation, simply push onto conduit!
Mighty-Bite™ PUSH-EMT® ConnectorThe 250-MB is used to connect a properly deburred length of EMT raceway to a box device, panelboard, or similar electrical enclosure. Simply push the fitting onto raceway with a slight twist. Remove the fitting by unthreading it from conduit end.